Parkside PBH 1550 A1 handleiding
Handleiding
Je bekijkt pagina 9 van 19
9
NI
unfamiliar with the power
tool or these instructions, to
operate the power tool. Power
tools are dangerous in the hands of
inexperienced users.
e) Maintain the power tools and
tool bits carefully. Ensure the
moving parts are functioning
correctly and do not getting
stuck. Check if parts are broken
or so badly damaged that that
the power tool's functions are
impaired. Get damaged parts
repaired before using the
power tool. Many accidents are
caused by poorly maintained power
tools.
f) Keep cutting tools sharp and
clean. Properly maintained tools
with sharp cutting edges are less
likely to get stuck and are easier to
control.
g) Use your power tool,
accessories and bits etc.
according to these instructions.
Consider your working
environment and the type
of job you wish to do. Using
power tools for applications other
than those intended can lead to
dangerous situations.
h) Keep the handles and gripping
surfaces dry, clean and free of
oil and grease. Slippery handles
and gripping surfaces prevent safe
operation and control of the power
tool in unexpected situations.
5) Service
a) Have your power tool repaired
only by qualified personnel and
only with original spare parts.
This will ensure that the safety of the
power tool is maintained.
Safety instructions for hammers
1) Safety instructions for all types
of work
a) Wear ear protection. Noise can
cause loss of hearing.
b) Use additional handles if these
are supplied with the power
tool. Loss of control can lead to
injury.
c) Hold the power tool by its
insulated gripping surfaces
when performing an operation
where the drill bit may come
into contact with hidden
electrical wiring or its own
power cord. Cutting accessory
contacting a "live" wire may make
exposed metal parts of the power
tool "live" and shock the operator.
2) Safety instructions when using
the long drill with hammer drills
a) Always start drilling at low
speed and once the drill
bit makes contact with the
workpiece. At higher speeds, the
drill can bend easily when it rotates
freely without contact with the
workpiece, and cause injuries.
b) Do not apply excessive
pressure and apply pressure
only in the longitudinal
direction of the drill bit. The drill
may bend and break or result in loss
of control and in injury.
Bekijk gratis de handleiding van Parkside PBH 1550 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBH 1550 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2661 MB |
