Parkside PBH 1550 A1 handleiding
Handleiding
Je bekijkt pagina 8 van 19
8
NI
use a residual current
protection device. Using a
residual current protection device
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you
are doing and use common
sense when operating a power
tool. Do not use a power tool
while you are tired or under
the influence of drugs, alcohol
or medication. A moment of
inattention while operating power
tools may result in serious injury.
b) Wear personal protective
equipment and always use
safety goggles. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will reduce
personal injuries.
c) Prevent unintentional start-up.
Ensure that the switch is in the
off-position before connecting
to the power source and/or
battery pack, picking up or
carrying the tool. Carrying power
tools with your finger on the switch
or connecting it to the mains with the
switch in on-position, may result in
accidents.
d) Remove any adjusting tools
or keys before you switch the
power tool on. A tool or a key left
in a rotating part of the power tool
may result in injuries.
e) Avoid working with your body
in an unusual position. Ensure
proper footing and balance at
all times. This enables better control
of the power tool in unexpected
situations.
f) Wear appropriate clothing.
Do not wear loose clothing or
jewellery. Keep your hair and
clothing away from moving
parts. Loose clothes, jewellery or
long hair can be caught in moving
parts.
g) If dust extraction and collection
units can be installed, they
have to be connected and used
properly. Use of dust collector can
reduce dust-related hazards.
h) Never assume that you are
safe enough and disregard
the safety rules for electric
power tools, even if you are
familiar with the electric power
tool after using it many times.
Carelessness may lead to serious
injury within a fraction of a second.
4) Power tool use and care
a) Do not overload the power
tool. Use power tools that are
intended for your work. The
correct power tool will do the job
better and safer at the rate for which
it was designed.
b) Do not use the power tool if
the switch is faulty. A power tool
which can no longer be switched on
and off is dangerous and has to be
repaired.
c) Disconnect the plug from the
socket and/or remove the
battery before making any
adjustments, changing tool bits
or accessories or putting the
power tool away. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d) Store power tools out of the
reach of children when not
in use. Do not allow persons
Bekijk gratis de handleiding van Parkside PBH 1550 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBH 1550 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2661 MB |
