Parkside PBH 1550 A1 handleiding
Handleiding
Je bekijkt pagina 5 van 19
5
NI
Congratulations on the purchase of your new
product. You have purchased a high quality
product. This operating manual is an integral
part of this Hammer Drill (hereafter referred
to only as the "drill"). It contains important
instructions on safety, use and disposal of
the product. Please familiarise yourself with
all operating and safety instructions before
using the product. Use the product only as
described and for the specified areas of
application. If the product is passed on to a
third party, please provide all documents to
the third party together with the product.
The digital form of this operating manual is
also available from the service department of
the manufacturer.
Revision: ID 001 - 2022-04 - REV001
The following symbols and key words are
used in this operating manual, on the drill or
on the packaging.
Mains plug is inserted (green
indicator).
Use only when the impact
drilling function is switched off!
Carbon brushes worn out (red
indicator).
≥ 100 A
The drill is intended for use only
in places that have a continuous
current load capacity of the grid
exceeding 100 A per phase
and are supplied with a rated
voltage of 230-240 V by a
distribution grid.
1. Introduction
Symbols used
Read the user manual.
Scope of supply
Products marked with this
symbol comply with all
applicable regulations of the
European economic area.
Protection category II. (double
insulation)
The "GS" symbol stands for
verified safety. Products that are
marked with this symbol meet the
requirements of the German
product safety law (ProdSG).
The model name on the hammer drill is a
combination of letters and numbers:
PBH 1550 A1 = Hammer drill
Indicates a hazard that, if not avoided,
could result in death or serious injury.
WARNING!
Signals a hazard that can cause injuries
when ignored.
CAUTION!
Warns against potential damage to
property.
NOTE!
• Hammer drill
• Keyed chuck
• Chuck key
• Depth stop
• Key for lubricating the housing cover
• Grease for tool inserts
• Accessories (tool) (suitable for use with
SDS+ system)
- 1 pointed chisel
- 1 flat chisel
- 3 drill bits (12, 16 & 18 mm)
Bekijk gratis de handleiding van Parkside PBH 1550 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBH 1550 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2661 MB |
