Parkside PBH 1550 A1 handleiding
Handleiding
Je bekijkt pagina 14 van 19
14
NI
• Open the housing cover for lubrication
1
using the supplied spanner
16
.
• Fill in suitable machine lubricant of type
k2K-30 (not included with the supply)
and then close the opening in reverse
order. Refill with gear grease for central
lubrication.
• Spray a small amount of MOS2 oil into
the tool holder if you do not intend to use
the drill for a longer period of time. This
prevents the impact piston from seizing.
Replacing the carbon brushes
The carbon brushes may only be replaced
by an authorised specialist workshop or by
qualified skilled personnel.
Replacing the mains cable
Damaged mains cables may only be
replaced with genuine replacement cables
available from the manufacturer.
The power cord should only be replaced
by an authorised specialist workshop or by
qualified skilled personnel to avoid safety
risks.
CAUTION!
Make sure that liquids do not get
inside the hammer drill.
Cleaning
• Clean the hammer drill regularly with
a dry cloth. Never use strong and / or
abrasive cleaning agents or solvents.
• Ensure that the ventilation slots are not
blocked and clean the housing of the drill
regularly with a soft cloth.
Storage
• Clean the hammer drill before storage.
• Keep the hammer drill in a safe, cool, dry
and well-ventilated place, out of the reach
of children when not in use.
• Store the hammer drill at an ambient
temperature of 0 - 40 ° C.
Transport
• Use the original packaging and secure
the hammer drill in place during transport.
• Always carry the hammer drill using the
handle provided for this purpose.
Bekijk gratis de handleiding van Parkside PBH 1550 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PBH 1550 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2661 MB |
