Parkside PAT 4 D6 handleiding
Handleiding
Je bekijkt pagina 20 van 52

20 GB/IE/NI
Battery status LED when use
Battery level
Red Yellow Green
Light up Light up Light up > 70 %
Light up Light up Off 30–70 %
Light up Off Off < 30 %
Clearing Jammed Staples
If a staple is jammed, do not squeeze the trigger
1
.
It may otherwise accidentally be triggered after removing the staple.
Note: Set the On/Off switch
8
to “0“ position prior to clearing the
jammed staple.
Open the magazine
4
and pull back on the pusher
3
.
Remove the jammed staple from the magazine
4
.
Note: Do not trigger the staple gun when empty to prevent wear.
Determining the Staple Length
Consider two factors when determining the correct staple length:
- the thickness of the material being fastened
- the composition (hardness) of the material being fastened.
4–6 mm staple or 6–8 mm nail in length will typically suffice when driving
into plywood and fiber board.
8–12 mm staple or 10 mm nail in length will typically suffice when fastening
into softwood such as pinewood.
Bekijk gratis de handleiding van Parkside PAT 4 D6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Parkside |
Model | PAT 4 D6 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 3332 MB |