Parkside PAT 4 D6 handleiding
Handleiding
Je bekijkt pagina 19 van 52
19 GB/IE/NI
Adding nails
Set the On/Off switch
8
to the “0“ position before working on
the product.
Turn the product over.
Squeeze the release button
3a
(see Fig. B).
Pull back on the pusher
3
(see Fig. B)
Follow icon shown on pusher
3
(see Fig. C) and add nails to
the magazine
4
(see Fig. C)
After adding nails, slide the pusher
3
in again until the magazine
4
is fully closed, (see Fig C).
Release the release button
3a
. It must click and lock into place for
the magazine
4
to be closed correctly.
Note: Use the window on the fill indicator
5
to see if the magazine
4
is empty.
Functions
Stapling & Nailing
Set the On/Off switch
8
to the “I“ position to switch the product on.
Press the safety contact
6
into the work piece.
Squeeze the trigger
1
to drive a staple/nail into the work piece.
Make sure to keep the product pressed against the work piece.
Set the On/Off switch
8
to the “0“ position to switch the product off.
Note: Hold tool firmly and press on work surface before firing to
ensure the complete penetration of the staple/nail.
Battery level indicator
9
shows the battery level while safety con-
tact
6
is pressed again work piece or press down trigger
1
when
On/Off switch
8
is set to “I” position.
Bekijk gratis de handleiding van Parkside PAT 4 D6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PAT 4 D6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3332 MB |
