Parkside PASA 20-Li C2 handleiding
Handleiding
Je bekijkt pagina 16 van 41
15GB/IE/NI
Fitting/changing the saw
blade
m
WARNING! Risk of injury!
Always switch the product off,
remove the battery pack[3] and
let the product cool down before
making any adjustments.
m
CAUTION! Risk of injury!
Saw blades are sharp and can
become hot during use. Always wear
protective gloves when handling saw
blades.
m
NOTICE! Risk of property
damage!
u The teeth of the saw blade[6] must point
downwards.
1. Turn the quick-release chuck[8] in the
direction of the arrow until it stops. Hold the
quick-release chuck in this position.
2. Push the saw blade[6] into the quick-
release chuck[8] until it stops.
3. Release the quick-release chuck[8] so that
it returns to its initial position.
4. The saw blade[6] is now locked.
Operation
Switching on/off
m
CAUTION! Risk of injury!
Always wear protective gloves when
handling or working with the product.
m
CAUTION! Risk of injury!
u Before switching on the product: Ensure
the saw blade[6] is not in contact with
the workpiece.
u Ensure your stance is stable. Always hold
the product firmly with both hands while
working.
m
CAUTION! Risk of injury!
u Keep your hands away from the saw
blade[6] when the product is in
operation.
NOTE
u You cannot lock the on/off switch[5] for
continuous operation.
Switching on
1. Release the switch lock[1] by pushing it in
on the left or right side.
2. Press and hold the on/off switch[5].
3. Regulate the speed as required by
changing the amount of pressure on the
on/off switch[5].
Switching off
1. Release the on/off switch[5].
2. When releasing the on/off switch[5], the
switch lock[1] moves back into its original
position.
Working instructions
m
CAUTION! Risk of injury and
damage to property!
u Wear protective gloves when handling
the saw blade[6]. In this way, you avoid
injury from cuts.
u Do not use any blunt or bent saw blades
or saw blades which are damaged in
any other way.
u Before sawing the workpiece, check for
hidden foreign objects such as nails and
screws and remove them.
u Always insert a suitable saw blade.
u Secure the workpiece with the aid of
clamping devices on the workbench.
u Apply only as much pressure as is
required for sawing. If there is excessive
pressure, the saw blade may bend and
break.
Bekijk gratis de handleiding van Parkside PASA 20-Li C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PASA 20-Li C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4162 MB |
