Parkside PASA 20-Li C2 handleiding

41 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 41
14 GB/IE/NI
Charging the battery pack
m
WARNING! Risk of injury!
Always unplug the charger[] from
the mains before inserting/removing
the battery pack[3].
NOTE
u You can charge the battery pack[3] at
any time without reducing its life cycle.
u Interrupting the charging process does
not damage the battery pack[3].
o Before operation: Charge the battery
pack[3] when it is at medium or low
charging level (see “Checking the battery
pack charging level”).
o The charging control LEDs (red[] and
green[]) indicate the status of the
charger[] and the battery pack[3].
LED Status
Red LED[] lights up Battery pack[3]
charges
Green LED[] lights
up
Battery pack[3] fully
charged
Green LED[] and
red LED[] flashing
Battery pack[3]
defective
Red LED[] flashing Battery pack[3] too
cold or too warm
Green LED[] lights
up (without battery
pack[3])
Charger[] ready
1. Insert the battery pack[3] into the
charger[].
2. Connect power plug of the charger[] to a
socket-outlet.
3. When the battery pack[3] is fully charged:
Disconnect the power plug of the
charger[] from the socket-outlet.
Remove the battery pack[3] from the
charger[].
Attaching/removing the
battery pack
Attaching the battery pack
1. Slide the battery pack[3] onto the
handle[2].
2. Ensure the battery pack[3] clicks
noticeably in place.
Removing the battery pack
1. Press the release button[4] on the battery
pack[3].
2. Pull the battery pack[3] from the
handle[2].
Checking the battery pack’s
charging level
o Press the button[]. The charging level
LEDs[] light up.
Colour Charging level
Red/orange/green Maximum
Red/orange Medium
Red Low
Assembly
Fitting/removing the grip
bracket
(Fig.C, D)
m
WARNING! Risk of injury!
Always switch the product off,
remove the battery pack[3] and
let the product cool down before
making any adjustments.
Fitting the grip bracket
o Push the grip bracket[] over the guides on
the base plate[7] and onto the product.
Removing the grip bracket
o Press the release[] and pull the grip
bracket[] forwards out of the guides.

Bekijk gratis de handleiding van Parkside PASA 20-Li C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParkside
ModelPASA 20-Li C2
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4162 MB