Parkside PAGHS 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 7 van 75
PAGHS 20-Li A1
GB
│
IE
│
NI
│
3 ■
Noise emission value
Noise measurement value determined in accord-
ance with EN62841. The A-rated noise level of
the power tool is typically:
Sound pressure level L
PA
= 82.2 dB
Uncertainty K
PA
= 5 dB
Sound power level L
WA
= 90.2 dB
Uncertainty K
WA
= 5 dB
Guaranteed 93 dB
(according to 2000/14/EC amended by
2005/88/EC)
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Saws a
h
= 2.5 m/s
2
Uncertainty K = 1.5 m/s
2
Wear ear muffs!
NOTE
► The vibration emission values and noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
► Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
The following symbols are used in these
original operating instructions/on the tool:
Read these operating instructions
thoroughly before using the tool for
the first time, and retain them for future
reference.
WARNING! Special safety precautions
are required when working with the
saw.
Read and observe all warnings.
Wear safety goggles!
Wear ear muffs!
WARNING! Risk of kickback. Protect
yourself from kickback from the saw
and avoid all contact with the rail tip.
WARNING! Risk of kickback!
Do not saw with the tip of the blade.
Always operate the saw with both
hands.
Attention! Risk of injury from sharp
blades.
Protect the tool from rain and moisture!
93
Guaranteed sound power level of the
tool
Guide rail length
Running direction of the chain
Bekijk gratis de handleiding van Parkside PAGHS 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PAGHS 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8216 MB |
