Parkside HVLP PFS 450 B1 handleiding
Handleiding
Je bekijkt pagina 15 van 19
28 GB/IE
3. Fill the spray material into the paint
container
[9].
4. Screw the paint container
[9] to the spray
unit
[4].
Use
Switching the product on and
off
m
WARNING! Risk of injury!
u Never aim the product at people or animals.
NOTE
u Keep the product at a constant distance of
approx. 15 cm from the spraying area when
working.
1. Insert the power plug
[] into a suitable socket.
2. Switching on and spraying: Press and
hold the trigger
[7].
3. Switch off: Release the trigger
[7].
Adjusting the spray quantity
o Increase or decrease the spray quantity:
Turn the adjusting wheel
[8] in the direction of +
or –.
Adjusting the jet type
o Turn the nozzle head [] so that the finger
tabs on the nozzle head point to the matching
symbol on the union nut
[].
Symbol Jet type Application
Round jet
Corners
Edges
Hard-to-reach areas
Vertical flat
jet
All other areas*
Horizontal
flat jet
All other areas*
* Adjust according to the spray direction
After use
o Switch off the product and disconnect it from the
mains. Let the product cool down.
o Check, clean and store the product
(see “Cleaning and care”).
Troubleshooting
Problem Possible cause Solution
The motor is
running but
the spray unit
is blocked.
Dried paint
residues block the
openings in the
area around the
needle
[2].
Pierce the
openings
in the area
around the
needle
[2]
with the
cleaning
needle
[].
The product
does not spray
although
there is still
some paint
in the paint
container
[9].
The angled
riser tube
[]
in the paint
container
[9]
points in the
wrong direction.
Reorient the
riser tube
[]
(see “Filling
with spray
material”).
Cleaning and care
m
WARNING!
Switch off the product and disconnect
it from the mains before performing
inspection, maintenance and cleaning
work!
Cleaning
NOTE
u Clean the product after each use, otherwise
the nozzles
[1] may clog up.
u Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants to
clean this product as they might be harmful to
its surfaces.
u Do not use silicone-based lubricants.
u Never place the entire product in solvent.
u Wear suitable gloves when cleaning.
Bekijk gratis de handleiding van Parkside HVLP PFS 450 B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | HVLP PFS 450 B1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1986 MB |
