Parkside HVLP PFS 450 B1 handleiding
Handleiding
Je bekijkt pagina 13 van 19
26 GB/IE
Before first use
Accessories
To operate this product safely and correctly, the
following accessories, i.e. tools and accessory tools,
are necessary:
o Suitable spray material
o Suitable personal protective equipment
Spray material is available through your authorised
dealer. When buying always consider the technical
requirements of this product (see “Technical data”).
If you are not certain, ask a qualified specialist and
get advice from your trusted dealer.
m
WARNING!
u Do not use accessories not recommended
by Parkside. This may result in electric shock
or fire.
Unpacking
1. Open the packaging and remove the product
carefully.
2. Remove the packaging material as well as the
packaging and transport bracing (if available).
3. Check that the delivery is complete.
4. Check the product and accessory parts for
transport damage.
m
WARNING!
u The product and the packaging materials are
not children’s toys! Children must not play
with plastic bags, sheets and small parts!
There is a danger of choking and suffocation!
Before use
Checking viscosity
o The product allows you to use spray material
with a viscosity of max. 70 DIN/sec.
o Measure viscosity (Fig. H):
– Fill the measuring cup
[] to the brim with
spray material.
– Let the liquid run out of the measuring
cup
[].
– Measure the seconds until the spray material
stops running out of the measuring cup
[].
The measurement result is the DIN/sec value.
o If you measure more than 70 DIN/sec:
Dilute the spray material gradually with a
suitable diluent until you measure a value
≤ 70 DIN/sec.
NOTE
u Only use thinners that are suitable for the
respective spray material. If you use the
wrong thinner, lumps will form and clog the
product.
u Never mix synthetic resin paints with
nitro thinner!
u Read the manufacturer’s instructions for the
respective spray material to find out about the
appropriate thinners.
u Do not spray granular/body-containing
material.
Preparing the spraying area
o Cover the area around the spraying surface.
Any uncovered surfaces in the vicinity may
otherwise become contaminated.
o Dry and clean the spraying surface.
o If you are painting surfaces made of wood,
metal or plastic: Roughen the spraying surface,
e.g. by sanding the spraying surface with
sandpaper.
Assembly
m
WARNING!
Switch off the product and disconnect
it from the mains before replacing
attachments.
Removing the spray unit
1. Open the lock []:
– Hold the motor unit
[] by the handle [].
– With the other hand, turn the spray unit
[4]
firmly in a counter-clockwise direction until the
spray unit disengages from the lock (Fig. E).
Bekijk gratis de handleiding van Parkside HVLP PFS 450 B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | HVLP PFS 450 B1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1986 MB |
