Parkside HG10350 handleiding
Handleiding
Je bekijkt pagina 5 van 25
7GB/IE/NI
Stage 1 is knee protection suitable for either flat or uneven surfaces. This
offers protection against puncturing to a power of (100±5) N.
Stage 2 is knee protection suitable for either flat or uneven surfaces in
difficult conditions, offering protection against puncturing up to a power
of (250±10) N.
Attaching the kneepad
The kneepad is attached to the knee with correct right and left side using
hook and loop fasteners so that the kneeling area is covered. The top
edge of the kneepad should protrude past the bent knee by 2cm. The
kneepad can be worn over clothes or be attached directly over skin.
m
Attention!
Ensure the hook and loop fasteners are not too tight. Do not allow the
hook and loop fasteners to cross the hollow of the knee. This could
impair blood circulation.
Suitable for persons with a waist measurement up to 100cm!
Finally, check that the kneepad is comfortably positioned and
sufficiently tightened for the work to be carried out.
Maintenance and care
General
Inspect the kneepads for damage prior to every use. If the kneepads
are damaged, for example torn, broken or parts are partially
loosened, they are no longer usable and should not be worn. Do not
tamper with this product, as the protective properties can no longer
be guaranteed. Severe soiling, alterations or improper use may
impair the performance of these knee protectors in a hazardous way.
426448_2301_GB_IE_NI_NL_02.indb 7426448_2301_GB_IE_NI_NL_02.indb 7 6/1/2023 5:51:58 PM6/1/2023 5:51:58 PM
Bekijk gratis de handleiding van Parkside HG10350, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | HG10350 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1131 MB |
