Parkside HG00962 handleiding
Handleiding
Je bekijkt pagina 11 van 50
11 GB/IE/NI
Electrostatic discharge could result in malfunctions.
When such malfunctions occur, remove the battery for a
short while and re-insert.
Failure Cause Solution
Low voltage sym-
bol
shown on
LCD display
3
.
The battery
voltage is lower
than 2.5 V.
Replace the battery in
line with the chapter
“Insert / replace
battery”.
The LCD
display
3
does
not continue to
count.
Faulty wiring or
circuit
Remove battery and re-
insert after 30 seconds.
Nothing is
displayed on the
LCD display
3
1. LCD display
is switched
off.
1. Switch the LCD
display on by
pressing the ON /
OFF key
5
.
2. Battery is the
wrong way
round or
the battery
contact is
poor.
2. Remove the battery
and insert /
replace it in line
with the terminals
and the chapter
“Insert / replace
battery” so that
it touches all
contacts.
3. The battery
voltage is
lower than
2 V.
3. Replace the battery
in line with the
chapter “Insert /
replace battery”.
Cleaning and maintenance
Clean the digital angle finder before and after using it with
a dry cloth; never use petrol, solvents or cleaning agents.
Do not immerse the digital angle finder into water. Liquids
can damage the digital angle finder.
Always switch the LCD display
3
off when not using the
digital angle finder. This will extend the life of the battery.
Hint – After use or cleaning:
Store the product in its storage case or
Hang the product on a suitable hook using the hanging
hole
8
.
Bekijk gratis de handleiding van Parkside HG00962, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | HG00962 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3411 MB |
