Parkside HG00962 handleiding
Handleiding
Je bekijkt pagina 10 van 50
10 GB/IE/NI
Before start of operation
Insert / replace battery
Tip: Low voltage symbol showing in the LCD display
3
indicates a discharged / flat battery.
Tip: When changing the battery, the LCD display
3
may
experience faults. Remove the battery and insert it again.
Push the battery compartment button
4
. Then, pull out the
battery receptacle
7
(see Fig. B).
Remove the old battery.
Insert battery receptacle containing the new battery into the
battery compartment and ensure correct polarity (+ and –).
Make sure that the plus terminal points outwards.
Push the battery receptacle
7
fully in (see Fig. B).
Starting up the device
Using the digital angle finder
Press the ON / OFF button
5
to switch the
LCD display
3
on.
= Direction of loosing the locking knob
2
.
Loosen the locking knob
2
by turning it anti-clockwise.
Put the digital angle finder on a flat surface. Make sure
both rulers
1
are aligned with the surface (see Fig. C).
Then, press ZERO button
6
to set data to zero.
Rotate the ruler to measure the angle.
Note: The locking knob
2
can be tightened by turning it
clockwise, so as to hold a desired measured angle.
= Direction of tightening the locking knob
2
.
You may also open the 2 rulers 180° straight aligned with
the surface (see Fig. D), and then press ZERO button
6
to
set zero. Rotate the ruler to measure the angle.
Tip: The display will show “Err”, if the digital angle finder has
been turned over 360° (see Fig. E). Turn back the digital angle
finder to the original starting point and measure again.
Tip: The LCD display
3
automatically switches itself off after
approx. 5 minutes.
Troubleshooting
The product contains sensitive electronic components. That is
why it experiences interference when in close proximity to radio
transmission devices. If any indication errors appear in the
display, remove such devices out of the proximity of the product.
Bekijk gratis de handleiding van Parkside HG00962, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | HG00962 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3411 MB |
