Parkside FCL-80115UK handleiding
Handleiding
Je bekijkt pagina 9 van 18
9 GB/IE/NI
Place the mounting bracket
5
(with spotlights
2
and handle piece
1
) on the open clamp
8
.
The handle piece
1
must be orientated in the
direction of the retaining plates on the clamp
8
,
as otherwise, it cannot be fixed. Also ensure that
y
ou place the holes on the underside of the mo
unt-
ing bracket
5
on the pins of the clamp
8
(see
fig. HI and HII).
Close the retaining plate of the clamp
8
(see fig. HIII).
Flip the clip of the clamp upwards, so that it
catches in the retaining plate (see fig. HIV).
Press the locking handle of the clamp
8
downwards to fix the mounting bracket
5
(see fig. HV).
Disassembling the work light
DANGER OF ELECTRIC
SHOCK! Remove the mains plug from the
mains
socket before disassembly.
CAUTION! RISK OF BURNS DUE TO HOT
SURFACES! Allow the light to cool down fully
before disassembling it.
To disassemble the individual elements, proceed
in the reverse order as described in the respect
ive
chapters.
Operation
Using the light (see fig. I)
Completely unwrap the mains cable
14
.
Connect the mains plug to the mains socket.
Switch the spotlight
2
on by pressing the ON /
OFF switch
15
into the “I“ position.
Switch the spotlight
2
off by pressing the ON /
OFF switch
15
into the “0“ position.
Loosen the wing bolt
3
to tilt the spotlight
2
into the desired position. Re-tighten the wing
bolt
3
to fix the spotlight
2
to the desired
position.
Maintenance and cleaning
DANGER OF ELECTRIC
SHOCK! Before cleaning the light, remove the
mains plug from the mains socket and wind the
mains cable
14
on the cable winder
12
.
DANGER OF ELECTRIC
SHOCK! To ensure electrical safety, never
clean the light with aggressive detergents or
immerse it in water.
CAUTION! RISK OF BURNS DUE TO HOT
SURFACES! Allow the spotlights
2
to cool
down completely.
Do not use solvents, petrol, etc. Otherwise the
light will be damaged.
Only clean with a dry, lint-free cloth.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal au-
thority for more details of how to dispose
of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Bekijk gratis de handleiding van Parkside FCL-80115UK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | FCL-80115UK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2465 MB |
