Parkside 4V PAS D7 handleiding
Handleiding
Je bekijkt pagina 21 van 82
20 GB/IE/NI
NOTE: You can use the LED work light[8]
even when the product is not in use. Set the
rotation direction switch
[5] to the middle
position. Switch the LED work light on/off
according to above description.
Cleaning and maintenance
o Before cleaning or carrying out any
maintenance:
– Set the rotation direction switch
[5]
to the middle position. This prevents
unintentional switching on.
– Remove the USB cable
[].
– Remove the bit
[], the magnetic bit
holder
[] or any of the attachments[]
[] [] []
.
– Disconnect the charger
[] from the
socket-outlet.
o Never allow fluids to get into the product.
o The product must always be kept clean, dry
and free from oil or grease.
Remove debris from it after each use and
before storage.
o Regular and proper cleaning will help
ensure safe use and prolong the life of the
product.
o Clean the product with a dry cloth. Use a
soft brush for areas that are hard to reach.
o In particular clean the air vents after every
use with a cloth and soft brush.
o The vents must always be clear.
NOTE
u Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
Maintenance
o Before and after each use: Check the
product and the following accessories for
wear and damage:
–
[] Magnetic bit holder
–
[] Screw bits
–
[] Torque attachment
–
[] Eccentric attachment
–
[] Angle attachment
–
[] Cutting attachment
If required, exchange the accessories for
new ones:
– see “Changing bits and magnetic bit
holder”
– see “Replacing the cutting blade”
Observe the technical requirements of the
accessories (see “Technical data”).
Storage
o Set the rotation direction switch[5] to the
middle position. This prevents unintentional
switching on.
o Store the product in a dry indoor location
protected from direct sunlight.
o Store the product in its carrying case[].
Transportation
o This product contains a Li-Ion rechargeable
battery and is therefore subject to
hazardous materials regulation. Users
may transport the product with built-in
rechargeable battery on roads or by sea
without special requirements.
o The packaging and marking is subject to
special requirements when it is transported
by third parties (e.g. airline, courier,
carrier). A hazardous materials expert must
be consulted when transported by third
parties.
NOTE: The integrated Lithium-Ion battery
may only be removed by trained or
qualified personnel.
Bekijk gratis de handleiding van Parkside 4V PAS D7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | 4V PAS D7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8840 MB |
