Pardini TR20 410 handleiding

Niet gecategoriseerd

Pardini

28 pagina's

PDF beschikbaar

Handleiding

Dismantling

1. Make sure the pistol is unloaded (see above).

2. Take off the magazine

3. Fig. 1 Hold the pistol. Use your left index finger to push in the end of the take-down lever until it slightly moves away from the frame. Then, with your left thumb, rotate

the take-down lever down 90 degrees.

4. Fig. 2 Slide off the whole top assembly from the frame.

5. Fig. 3 Caution! The recoil spring is compressed! Holding the slide in your left hand, push in the recoil spring guide rod/spring assembly toward the muzzle. Lift up

and slowly release the spring tension.

6. For models fitted with a compensator, loosen the locking screws, remove the securing pin and work it off the barrel.

7. Fig. 4 Remove the barrel from the slide.

8. Reassemble in reverse order. Before returning the take-down lever to its locked position, push the top assembly slightly to the rear of its normal closed position.

CLEANING AND LUBRICATION

Use first a properly sized brass brush on the chamber and bore and then clean the bore with a patch - insure that all lead is removed to insure top accuracy and function.

Lubricate the slide/frame guides with a simple lubricant with no additive. Do NOT use solvent or oils on the trigger mechanism. At least every 2.500 rounds disassemble

and thoroughly clean the magazines.

Bekijk gratis de handleiding van Pardini TR20 410, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.