Parasound ZPhono USB handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
AC Voltage Selection
115v / 230v AC Voltage Selector Switch
This switch is found on the chassis bottom. The 115V position of this switch is correct for North
America and Brazil; most other countries require setting it to 230V. If you are in doubt of your local
AC voltage (sometimes referred to as “mains”) call your dealer. The following website is also
helpful: http://en.wikipedia.org/wiki/Mains_electricity_by_country#Voltage_ranges
Make sure the 115/230V switch on its bottom side is set for the correct AC line (mains)
voltage before you plug in the Zphono•USB’s power cord and before you install it. The unit
could be seriously damaged if this switch is set incorrectly.
The 115V setting is correct for North America where the Zphono•USB can operate safely with AC
line voltages between 110-120V. Most other countries will require the switch to be set to 230V. With
the 230V setting the Zphono•USB can operate safely with AC line voltages between 220V-240V.
Note: The Zphono•USB could be seriously damaged if the AC Voltage Selector switch is set
incorrectly. Prior to plugging your Zphono•USB into an AC power source, check the position
of the 115v/230v switch on the Zphono•USB’s chassis bottom and do not depend on the 115v
or 230v markings on the outside of its cardboard carton.
Bekijk gratis de handleiding van Parasound ZPhono USB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parasound |
| Model | ZPhono USB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1666 MB |
