Parasound John Curl Tribute Edition JC 100 handleiding

11 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 11
4
Keeping Records for Future Reference
Your JCA100 is uniquely serialized by faceplate and chassis serial number combinations. We have already
registered your name and address in case any issues occur with your unit, so a receipt will not be required
for warranty repairs.
Important Warranty information
There is no Parasound warranty for this unit if it was not purchased from an Authorized Parasound
Dealer. A list of Authorized Parasound Dealers and detailed warranty information is available at
www.parasound.com. A missing or altered serial number could indicate that this unit was re-sold by an
unauthorized dealer or is stolen merchandise. If this unit is missing its serial number or the serial number
has been altered, you should return it to your dealer immediately for a full refund.
Investigate any claims made by a dealer who is not listed on our web site very carefully. Statements an
unauthorized dealer makes regarding their own coverage or third-party warranty coverage are
undependable and misleading because unauthorized dealers and warranty companies lack the capability to
make repairs or arrange for repairs of Parasound equipment.
Unauthorized dealers lack the capability to make repairs or arrange repairs of Parasound equipment.
Unpacking Your JCA100 & Placement Guidelines
Unpacking Your JCA100
Carefully remove your JCA100 from its shipping carton and locate the enclosed accessories: AC power cord,
a 12V trigger wire for auto turn on, rack mounting brackets.
While you are unpacking your JCA100, inspect it thoroughly for possible shipping damage and tell your
Parasound dealer immediately if you find any evidence of shipping damage. Note: Please save and
store both the inner and outer cartons and, most especially, the foam packing inserts to protect the
JCA100 if you must move it or ship it. You may wish to flatten the cardboard cartons to save room in
storage after cutting the taped seams on the bottom flaps.
Placement Guidelines
The JCA100 will be easier to use and will last longer if you follow these simple guidelines:
The JCA100 should never be placed in a completely enclosed cabinet.
Place the JCA100 on a surface that will adequately support its substantial weight.
Use input and output cables that are long enough to leave some slack; that will enable you to pull the
JCA100 out of a cabinet to check or to change connections without inadvertently disconnecting
cables.
Place your JCA100 where you can route input and output signal cables as far as possible from any
AC cords.
Where input interconnects must cross AC cords, they should do so only at a 90° right angle.
Always position the JCA100 horizontally.
The JCA100 should never be stacked directly above another power amplifier or directly below another
component.
Do not install the JCA100 in an unventilated equipment cabinet or compartment. Pockets of stagnant
hot air can build up even in a cabinet with an open front and back.

Bekijk gratis de handleiding van Parasound John Curl Tribute Edition JC 100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkParasound
ModelJohn Curl Tribute Edition JC 100
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1088 MB