Handleiding
Je bekijkt pagina 46 van 87
37
4. Put an original on the glass platen or into the ADF (please see Chapter 2 for how to put an
original)..
5. Click “Scan-Scan to Email” in printer control panel.
6. Select proper scan setting, click “Scan” button to make a scan.
Instructions for settings of group e-mail sending:
Set the group name for group e-mail sending by webpage, and set the members, i.e.the receivers,
in the group of group email. After finishing scanning, firmware will send the scanned documents to
the mail server. Then mail server sends the documents to every member of the group.
Scan to FTP
Be sure the user is in an Internet-connected environment in scanning files to FTP server. If you
want to scan large files, you may need to input the server address, user name and password to log
in the server, with specific operation steps as below:
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. Configure the FTP address book
3. Put an original on the glass platen or into the ADF (please see Chapter 2 for how to put an
original).
4. Click “Scan-Scan to FTP” in printer control panel.
5. Select proper scan setting, click “Scan” button to make a scan.
Scan to SMB
To use “Scan to SMB” function, you need to create a shared folder on the Windows or Mac
computer first.
Create a shared folder
Windows10 is taken as example for description of the following steps.
1. Right click the folder under Windows system you want to share, and select Properties.
2. Select the “Share” tab, and click “Share”.
3. In the pop-up “Network Access” window, click the drop-down menu, select “Everyone”, and click
“Add”.
4. Change the “Everyone” permission level added in Step (3) to “Read/Write”, and click “Share (H)”
in the lower right corner.
5. If your shared folder path is displayed at the network path, it means it is successfully shared.
“Scan to SMB” configuration
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. To configure SMB address book .
3. Put an original on the glass platen or into the ADF (please see Chapter 2 for how to put an
original).
4. Click “Scan - Scan to SMB” on printer control panel.
5. Select proper scan setting, click “Scan” button to make a scan.
Bekijk gratis de handleiding van Pantum CM230ADN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pantum |
| Model | CM230ADN |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15427 MB |
