Panduit PLA-100 handleiding
Handleiding
Je bekijkt pagina 26 van 35
© Panduit Corp. 2020
PLA-100, PLA-H100
Rev. 02 1 / 2021
Page 25 of 34
Label is still presented, at the
peel plate, and a cable has
been inserted into the
Applicator Head.
Contact the cable to the label, more
slowly, to ensure adhesion and label
removal, prior to attempting a wrap.
Peel and Present Error LED
Double Flash (**_**_**_**)
Cadence 2
Media failed to find Home and
label did not peel.
Re-align media, within roller guides.
Media is slipping on Take-up
spindle.
Remove take-up hub and reattach
liner/tether to take-up spindle (see
section 10. Installing the Media).
Note: “Cadence” refers to the flashing pattern of the Peel and Present Error LED.
Note: During normal operation, if label does not get wrapped after the cable detection switches
are engaged and is still presented at the wedge, the HMI will blink the Cadence 1 on the Peel
and Present LED and remain in ready State.
12C: Take-Up Error Troubleshooting
Error Location Indicator and State
Potential Problem
Solution
Take-Up Error LED
On (steady)
Take-Up motor failed to
initialize. Take-Up spool
overloaded. Only during
power-up and initialization.
Contact Panduit Service Center.
Take-Up chattering or not
peeling labels due to maximum
diameter reached 5.00” .
Remove Take-Up and attach new
tether and press the reset button to
clear error.
Bekijk gratis de handleiding van Panduit PLA-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panduit |
| Model | PLA-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6643 MB |
