Panduit PES400 handleiding
Handleiding
Je bekijkt pagina 7 van 52
© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01 Page: 6 of 51 4-2018
WARNINGS AND ADVICE DURING INSTALLATION
WARNING! To avoid electric shock the power plate protective grounding conductor
must be connected to a ground circuit that conforms to the National Standard.
AVERTISSEMENT! Pour éviter les risques de décharge électrique, le conducteur de
protection de la plaque d’alimentation doit être connecté à un circuit de mise à la
terre conforme à la norme nationale.
WARNING! Remember to connect the serial cable to the machine while it is switched
off to avoid damaging the circuits.
AVERTISSEMENT! Il est important d’éteindre la machine avant d’y connecter le câble
série afin d’éviter d’endommager les circuits.
• The Identification Label attached to the rear panel contains information about the
serial number, the type of machine, the necessary power supply and maximum
current.
• Before switching the machine on, be sure that all the cables have been connected
correctly and that the local power supply corresponds to that stated on the label.
• The label layout is as follows:
Model: PES400
Type: Embossing Machine
Volt: 100 – 240 VAC
Hz: 50/60
Imax: 5.6 A
S/N: Serial Number
Mfg.: Manufacture Date
Fuse rating: 2x – T5A 250VAC
1.4 Install Software for the USB to Serial Adapter
1.4.1 System Requirements
• Windows 10, Windows 8, Windows 7, Vista, Windows 2000 SP4 or Windows
XP SP2.
• USB to Serial DB9 adapter
• Computer with available USB ports
Bekijk gratis de handleiding van Panduit PES400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panduit |
| Model | PES400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23253 MB |
