Handleiding
Je bekijkt pagina 32 van 56
3232
Integral CookingIntegral Cooking
Pando Installation Manual
English
• Never attempt to modify the characteristics of this appliance, as this
constitutes a danger and automatically voids the manufacturer’s
warranty.
• It must be possible and accessible for the user to disconnect the applian-
ce from the power supply after installation. The power plug must be ea-
sily accessible, otherwise it must be tted with an electrical disconnect
switch in accordance with current electrical installation regulations.
• The hood is designed for normal domestic use. It must not be used for
industrial, professional or other purposes other than those for which it
was not designed.
• Special care must be taken when drilling holes in walls or ceilings to
ensure that there are no hidden electrical lines, pipes, iron beams, etc.,
as this can cause serious faults, electrical current shunts or transmis-
sion of noise and vibrations.
• IMPORTANT: When installing the appliance, before making the elec-
trical connections, always disconnect the power panel that will supply
it (diff erential or circuit breaker from the general electrical panel of the
house).
• The installation of the hood and ducts must comply with the standards
in force regarding the ventilation of closed rooms. In particular, the air
evacuated must not be led through a duct used for the discharge of fu-
mes from appliances using gas or other fuels (central heating systems,
etc.).
• The negative pressure in the room must not exceed 0.04mbar. This
condition allows the hood to function optimally. To obtain this atmos-
phere, a permanent air inlet must be provided in order to avoid air
tightness (it is advisable to have a ventilation grille for this purpose).
Windows and doors are not suitable for this purpose.
• The power supply must be stable and in accordance with the electri-
cal requirements indicated (see the nameplate of the appliance). If it
is not stable and receives a supply with variations in voltage, current
or frequency, such as harmonics, transients, voltage dips, overloads,
electrical storms, etc., the hood may malfunction or even break down,
and the repair would not be covered by the guarantee. If this is the
case, the hood should be disconnected and an electrician or electrical
company should be contacted to solve the power supply problem.
Bekijk gratis de handleiding van Pando GRM FCRL-AE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pando |
| Model | GRM FCRL-AE |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 6568 MB |
