Handleiding
Je bekijkt pagina 6 van 28
6
Power-Indicator
The RED LED when
lit indicates that not
only the TV set is in
stand-by mode but
also the external AC
adaptor is still on.
Quick start Guide
1 Connect the mains lead to the AC Adaptor.
2
Connect the AC Adaptor DC plug to the DC IN socket.
3 Plug into household mains socket.
• Be sure to use the power cord and AC adaptor
included in the accessories.
• Do not use the AC adaptor for other than the
specified equipment.
• Unplug the AC adaptor if it is not used for long
time.
• Do not place any objects on the AC adaptor.
• Do not use the AC adaptor outdoors.
• Do not attempt to repair the AC adaptor if it is
broken or malfunctioning. Refer the servicing to
the service representative.
• Do not try to open the AC adaptor.
• Do not use water or wet cloth for cleaning the
AC adaptor.
2
1
3
2. Connecting the AC Adaptor
3. Switch TV ON
Press to turn the set on.
IMPORTANT NOTES
There are two ways to switch the TV set to
stand-by mode.
(A) Press the switch on the LCD TV and
check RED LED is lit.
OR
(B) Press the Stand-by button on the remote
control.
The TV set can be switched on by the remote
controller if it was switched to stand-by using
method (A) or method (B).
When programme number up ( )/down ( )
buttons on the side panel of the main part or
on the remote control are pressed in stand-
by mode, TV turns on.
Bekijk gratis de handleiding van Panasonic TX-15LT2X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TX-15LT2X |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 4252 MB |
