Handleiding
Je bekijkt pagina 23 van 36
English - 22 -
Change Soundbar/Change Receiver: If you
would like to change the soundbar or receiver that’s
connected to your TV highlight Change Soundbar/
Change Receiver and press Select. To remove the
device highlight Change Soundbar/Change Receiver
and press the Option button.
Restore Soundbar Defaults/Restore Receiver
Defaults: Restores all the settings that you may have
changed back to factory defaults. This option will be
available if you change the default settings.
Advanced Settings
Adjust the power timing if your soundbar or receiver
does not switch on/o.
Press Fast Forward or Rewind to increase or de
-
crease the increments.
Press Option to restore back to default settings.
Live TV
This menu allows you to tune in your TV, manage the
channels, set up a CI card and set parental controls.
Highlight Live TV and press Select.
Channel Scan
You should have already tuned in your TV during the
initial setup process. But if you skipped the channel
scan step or if you need to retune your TV follow these
instructions.
Highlight Channel Scan and press Select.
You will be prompted to check that your antenna is
set up and that the cable is plugged properly into
the antenna input socket on your TV. Press Select
to proceed.
Select your scanning preference to install channels.
Satellite, Terrestrial and Cable options will be
available.
If the Terrestrial option is selected, the TV will search
for digital terrestrial broadcasts. Select the search
method on the next screen and press Select to start
the search. If you continue with the manual scan, you
will need to congure the Frequency and UHF Band
options before starting the scan.
If the Cable option is selected, the TV will search for
digital cable broadcasts. On the next screen, select the
cable provider, if any available, or the search method,
then press Select to start the search. You may need
to congure the Network ID and Frequency options
before starting the scan.
If the Satellite option is selected, you can choose an
operator on the next step, if any available. You can
also choose to perform complete or manual scan.
Highlight the option you prefer and press Select button
to proceed. If you continue with manual or complete
scan option, you will have to select the satellite in
the next step. Then the Satellite Connection screen
will be displayed next. You can set the LNB Type,
LNB Power, DiSEqC Version, Port, Single Cable,
ToneBurst, Frequency, Polarisation, Symbol Rate
and Scan Mode parameters of the selected satellite
corresponding to your environment on this screen.
Depending on your previous selections, some options
may not be available or may be set automatically.
Change if necessary and proceed.
When you are nished, press the Play/Pause button.
The TV will start to search available broadcasts.
You will be asked at some point whether you want to
clear existing channels, if you have installed channels
previously using the same search option. Highlight
Yes, Clear Channels and press Select. All the
previously tuned in channels will be deleted. Highlight
No, Keep Channels and press Select to proceed
without clearing existing channels.
While the search continues you can press the Select
button to cancel. When the search is completed the
results will be displayed. You can choose to make
changes on the channel list or rescan at this point.
Highlight Done and press Select to nish the setup.
Automatic Service Update
You can allow your TV to automatically scan for
network operator changes when TV enters standby
mode. Press Select to turn this feature on and o.
Favourite Channels
You can view and manage your favourite channels
here.
Highlight Favourite Channels and press Select.
If you do not have any favourite channels go to Manage
Channels menu to add channels by pressing the
Select button. Then select the channel source to view
the channel list. Highlight a channel and press Select
to add this channel to your favourites. You can make
multiple selections.
If you have priorly added channels to your favourites
you can press Select to select the channels you want
to remove from your favourites.
Manage Channels
Manage your favourite channels and select the
channels you want to display.
Highlight Manage Channels and press Select. Then
select the channel source. Terrestrial Channels,
Cable Channels, and Satellite Channels options will
be available. Available options may dier depending
on the currently installed channels.
You will now see the channel list with several tabs: All,
Favourites, Free, Encrypted, Audio, HD, SD, and
Hidden. Available tab options may dier depending
on the installed channels.
Bekijk gratis de handleiding van Panasonic TV-65Z80AEY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TV-65Z80AEY |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 4605 MB |
