Handleiding
Je bekijkt pagina 93 van 191
93
English
■ [Controller ID function]
Enables/disables the [Controller ID function].
[Off]:
Disables the [Controller ID function]. (Can be
operated as normal remote control.)
[On]:
Enables the [Controller ID function]. Effective on
switching to [On].
Note
●
To use the [Controller ID function], setting ID numbers
both for the remote control and for the display unit is
required.
For ID number setting for the remote control, see
page 176.
●
About how to reset the settings to defaults, refer to
“Initialization”. (see page 182)
■ [Serial ID function]
Set to control external control with the PC connected to
SERIAL terminal according to the Display’s ID number.
[Off]:
Disables external control by the ID.
[On]:
Enables the external control by the ID.
■ [Serial response (Normal)]
Sets whether to send the response command to normal
commands without ID.
[Off]:
Does not respond. (Including the inquiry command)
[On]:
Responds.
■ [Serial response(ID all)]
Set whether to respond to the command or not, when
serial command of ID number “0” is received.
[Off]:
Does not respond.
[On]:
Responds.
■ [Serial ID group]
When controlling multiple displays simultaneously via
serial communication, those displays are grouped as
one.
A to G (7 groups)
■ [Serial response(ID group)]
Sets whether to respond to the command or not,
when serial command, which the group is specified, is
received.
[Off]:
Does not respond.
[On]:
Responds.
■ [Serial daisy chain position]
Sets the first and the last terminals of the daisy chain
connection when serial-controlling this unit by the daisy
chain connection via DIGITAL LINK.
[---]:
When controlling this unit alone with serial control,
or connecting at a position other than the first and
last terminals in a daisy chain
[Top]:
When connecting at the first terminal in a daisy
chain
[End]:
When connecting at the last terminal in a daisy
chain
Sensor settings (SQ2H series)
Sets and checks the connections of each sensor.
[Sensor settings] - submenu screen
Sensor settings
Sensor operation OK
Ambient light sensor
Proximity sensor
Connection check
Power save Min
Content operation
Colour sensor Colour temperature
Mode Illumination
Adjust white balance
2 screens colour matching adjust
■ [Connection check]
Checks the connections of sensors.
The following messages are displayed according to
the status.
Status Display
Connected Sensor operation OK
Not connected Check the sensor connection.
Note
●
Set each sensor after [Sensor operation OK] is
displayed.
■ [Ambient light sensor]
Sets the operation of the ambient light sensor.
[Off]:
Disabled
[Power save Min], [Max]:
Automatically adjusts the backlight brightness
according to the viewing environment.
[Max]: Makes adjustment suited for bright
environments.
[Min]: Makes adjustment suited for dark
environments.
Bekijk gratis de handleiding van Panasonic TH-75SQ2HW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TH-75SQ2HW |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 26224 MB |
