Handleiding
Je bekijkt pagina 66 van 191
66
English
■ [HDMI1 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at HDMI1 input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at HDMI1 input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
■ [HDMI2 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at HDMI2 input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at HDMI2 input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
■ [HDMI3 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at HDMI3 input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at HDMI3 input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
■ [USB-C power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at USB-C input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at USB-C input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
●
When this function is set to [On], set [Quick start] to
[On] to enable the operation.
●
When [Quick start] is set to [Off], if images are not
detected, the unit enters the standby state even if it is
set to [On]. However, the unit does not start up even
if images are detected again. To operate the power
management function, it is necessary to set both
[Quick start] and [USB-C power management] to [On]
respectively.
■ [SLOT power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at SLOT input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at SLOT input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
●
This function is enabled only when the DIGITAL LINK
Terminal Board is attached to the expansion slot
(SLOT).
■ [PC power management] (DPMS function)
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at PC input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at PC input:
Power is turned on; the power indicator lights up
blue.
Bekijk gratis de handleiding van Panasonic TH-75SQ2HW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TH-75SQ2HW |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 26224 MB |
