Handleiding
Je bekijkt pagina 18 van 42
English - 17 -
Wireless Device, available networks will be listed.
Highlight Next again when you are done and press
OK to continue.
Depending on the model of your TV and supplied
remote controls, an automatic pairing screen may
be displayed at this point. Follow the on-screen
instructions to pair your wireless remote control
(depends on the model of the remote control) with
your TV. Refer to the Remote Control section for more
information. If you want to pair your remote control
at a later time, highlight Setup Later and press OK.
On the next screen the Add Devices menu will be
displayed. You can connect external wireless audio
devices, remotes, keyboards, and mice to your TV.
For audio devices use the Pair Audio Link Device
(
Bluetooth) option, for wireless remotes, keyboards,
and mice use the Pair
Remote Control or Other
Device (Bluetooth) option. Highlight the option you
prefer, press OK and wait for the TV to complete device
discovery. If you select Pair
Remote Control or Other
Device (Bluetooth) option, instructions to pair your
remote will be displayed first. Highlight Discover and
press OK when you are ready. Available devices will
be listed. Highlight your device from the list and press
OK. Highlight Connect from the options menu and
press OK to complete the pairing process. You can
use the Discover option on the bottom side to repeat
device discovery. Highlight Continue and press OK to
proceed. You can also use the related options in the
Settings>Devices menu to add/remove devices later.
Refer to the Connectivitysectionformoreinformation
onconnectingwirelessdevices.Tocontinuehighlight
Next and press OK.
On the next screen you need to agree to the
manufacturer’s terms and conditions for Freely to
make use of the related services. Scroll the page to
read the entire text using the Programme +/- or Up/
Down directional buttons. Highlight Yes and press OK
on the remote to confirm and proceed. Highlight No
and press OK to proceed without confirmation. For
further requirements for Freely services refer to the
Freely Platform section.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching
and time zone (depending on the country selection)
preferences. Additionally you can set a broadcast
type as your favourite one. Priority will be given to the
selected broadcast type during the search process
and the channels of it will be listed on the top of the
channel list. When finished, highlight Next and press
OK to continue.
About Selecting Broadcast Type
To turn a search option on for a broadcast type highlight
it and press the OK, Left or Right directional button. To
turn the search option off press the OK, Left or Right
directional button after moving the focus on the desired
broadcast type option.
Digital Aerial: If the D. Aerial broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
Digital Cable: If the D. Cable broadcast search
option is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed. A
dialogue may be displayed depending on the country
selection before starting to search asking whether you
want to perform cable network search. If you select Yes
and press OK you can select Network or set values
such as Frequency, Network ID, and Search Step
on the next screen. If you select No and press OK or
the network search dialogue is not displayed, you can
set Start Frequency, Stop Frequency, and Search
Step on the next screen. When finished, highlight Next
and press OK to continue.
Note: Searching duration will change depending on the
selected Search Step.
Satellite: If the Satellite broadcast search option
is turned on, the TV will search for digital satellite
broadcasts after other initial settings are completed.
Before satellite search is performed some settings
should be made.
Depending on the model and the selected country
the next step may be the selection of the installation
type for satellite. You can select to start an operator
installation or a standard installation at this point. If
you want to perform an operator installation, set the
Install Type as Operator and then set the Satellite
Operator according to your operator preference.
Some of the following steps may differ or be skipped
depending on the selected operator in this step. If you
set the Install Type as Standard, you can continue
with regular satellite installation and watch satellite
channels. Press OK to proceed.
Antenna type selection screen may be displayed
next. You can select Antenna type as Direct, Single
Satellite Cable or DiSEqC switch by using the Left or
Right directional buttons. After selecting your antenna
type press OK. On the next screen press OK to see
the options to proceed. Continue, Transponder list
and Configure LNB options may be available. You
can change the transponder and LNB settings using
the related menu options.
• Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press OK to
continue. Select an available satellite on the next
screen and press OK, highlight Continue and press
OK again to scan for services.
• Single Satellite Cable: If you have multiple recei
-
vers and a single satellite cable system, select this
antenna type. Press OK to continue. Configure
settings by following instructions on the next screen.
Bekijk gratis de handleiding van Panasonic TB-55W60AEY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TB-55W60AEY |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5372 MB |
