Handleiding
Je bekijkt pagina 35 van 64
35
Operation (continued)
Setting a Delayed Start
1
The start time can be delayed
to start cooking at a later time.
To do this, first press Timer/
Clock once.
2
ヵㄊㄎㄆ ヸㄆㄊㄈㄉㄕ
ュㄆㄇㄓㄐㄔㄕバモㄖㄕㄐチヤㄐㄐㄌ
ヴㄕㄓㄕバヴㄆㄍㄆㄕ
ヴㄆㄏㄔㄐㄓチンㄆㄉㄆㄕ
Set the desired delay time by
turning dial (up to 1 hour and
30 minutes).
3
Press Microwave until the
desired power level appears
in the display. 1000 W is the
highest and 100 W is the
lowest.
4
ヵㄊㄎㄆ ヸㄆㄊㄈㄉㄕ
ュㄆㄇㄓㄐㄔㄕバモㄖㄕㄐチヤㄐㄐㄌ
ヴㄕㄓㄕバヴㄆㄍㄆㄕ
ヴㄆㄏㄔㄐㄓチンㄆㄉㄆㄕ
Set cooking time by turning
dial (see previous page for
maximum times).
5
ヴㄕㄓㄕバヴㄆㄍㄆㄕ
ヴㄆㄏㄔㄐㄓチンㄆㄉㄆㄕ
Press dial to Start, the delay
time will count down, then
cooking will begin.
NOTES:
1. If the oven door is opened
during Kitchen Timer,
Standing Time, Delay Start,
the time in the display
window will continue to
count down.
2. Standing Time and
Delay Start can not be
programmed together
with auto programs
(such as Defrost, Sensor
Reheat, Auto/Sensor
Cook and Steam Clean)
and preheating. This is
to prevent the starting
temperature of food from
rising before defrosting or
cooking begins. A change is
starting temperature could
cause inaccurate results.
3. When using Standing Time
or Delay Start, it is up to 2
power stages.
4. If the time exceeds one
hour, it will count down
in units of minutes. If less
than one hour, the time
will count down in units of
seconds.
5. An “H” will appear in the
display to denote hours.
F0003CW90AP_EN (NN-CV88QSAPH)-1024.indd 35 2024/10/24 13:39:38
Bekijk gratis de handleiding van Panasonic NN-CV88QS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | NN-CV88QS |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 11211 MB |
