Panasonic NI-GWG090 handleiding

Handleiding

12345678910111213141516171819202122232425262728/ 28

Afdrukken

Je bekijkt pagina 6 van 28

11

English

English

10

HOW TO ASSEMBLE

Be sure to assemble the product on a flat and stable

floor.

1. Insert the telescopic pole into

the telescopic pole hole on

the power base correctly,

until a "click" spring lock

sound is heard.

Note: note the direction in

which the telescopic

pole is loaded.

spring

lock

2.a. Loosen the lock button on the uppermost part of the

telescopic pole, then stretch the upper end of the

telescopic pole upward to its maximum height, then

fix the lock button tightly.

b. Install the hanger on the telescopic pole (small end).

The hole on the telescopic pole should be aligned with

the telescopic pole socket below the hanger when

installing the hanger. Then press the hanger down

hard to make sure that the telescopic pole is completely

stuck into the telescopic pole socket below the hanger.

And the spring lock snaps into the small hole on the

telescopic pole socket underneath the hanger.

Note: Please note the direction in which the hangers

are loaded.

c. Loosen the lock button at the very bottom of the

telescopic pole, then stretch the telescopic pole upward

to its maximum height, and then press the lock button

tightly.

a

b

spring

lock

spring

lock

c

3. Align the snaps on the back of the ironing board with

the telescopic pole one by one, and then fasten them into

the telescopic pole with some force.

Note:

①The correct direction of the ironing board and the

hanger is as shown.

②When installing the ironing board, please note that the

upper part of the ironing board should be on top of the

uppermost lock button of the telescopic pole.

③Hold the product steady when installing the ironing

board so that it does not tip over.

④On the back of the ironing board, the side with the

steamer holder is the upper end of the ironing board.

Note: When removing the hanger and telescopic pole,

please first press the spring lock inward with a hard

object to remove the hanger.

5. Align any of the three small

protrusions on the outside

of the fixed nut with any of

the three notches on the

hose hole and insert it on

the power base with a

downward force. Then tighten

the fixed nut clockwise until it

makes a "click" sound.

1

2

4. Place the steamer head into the

steamer holder on the hanger.

Tips:

The steamer holder can be installed in reverse direction,

and you can change the direction of the steamer holder

according to your personal preference.

①When disassembling the holder, please use a hard object

to press the spring lock inward first to remove the

steamer holder.

②Reverse the direction of the steamer holder, and then install

the steamer holder downward.

③ Place the steamer head into the steamer holder.

spring

lock

③②①

The uppermost lock button

of the telescopic pole

Ironing board

direction

12345678910111213141516171819202122232425262728/ 28

Bekijk gratis de handleiding van Panasonic NI-GWG090, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Stoomreiniger