Panasonic ET-PKD521B handleiding
Handleiding
Je bekijkt pagina 4 van 24
4 -
ENGLISH
Product components
This is a projector mount bracket for installing projectors.
Use this together with the ceiling mount bracket for high ceilings or low ceilings (sold separately).
■ Supported ceiling mount brackets and projectors
Ceiling Mount Bracket
ET-PKD520H / ET-PKD520S
Projector
PT-RQ25K / PT-RQ18K / PT-RZ24K / PT-RZ17K / PT-RZ14K / PT-RQ22K / PT-RZ21K / PT-RS20K / PT-RZ16K /
PT-RQ13K / PT-RZ12K / PT-RS11K
Note
z
Models other than the above may also be supported. Refer to the operating instructions for your projector or
the following website.
https://panasonic.net/cns/projector/
■ Structural components
Check that the package contains the following parts. The number enclosed in < > is the quantity.
Projector mount bracket <1>
This is used to install the projector itself.
The bracket has a function for adjusting horizontal
tilt.
Hex head bolt, captive washer <6>
(M6 × 16)
These are used to mount the bracket onto the
projector.
Hex head bolt, captive washer <4>
(M10 × 40)
Prevents the projector from falling.
Wire rope <4>
Approx. 2.0 mm (3/32") wire diameter,
800 mm (31-1/2") length
z
Tightening torque for the screws are M6: 4±0.5 N•m, M10: 20±1 N•m.
z
When tightening up the screws, use a tool such as a torque screwdriver or torque wrench. Do not use electric
screwdrivers or impact screwdrivers.
Attention
z
Dispose of the packaging materials properly after taking the product out of it.
z
Store small parts in an appropriate manner, and keep them away from small children.
Bekijk gratis de handleiding van Panasonic ET-PKD521B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | ET-PKD521B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3315 MB |
