Panasonic DP-001-P handleiding
Handleiding
Je bekijkt pagina 6 van 12
6
DP-0
ORDER GUIDE
Model No.
DP-001
Rated pressure range
1 : −100.0 to +100.0 kPa (Low pressure type)
2 : 0.000 to +1.000 MPa (High pressure type)
-P-J
Cable
None : Connector attached cable 2 m 6.562 ft
J : Type without connector attached cable
Comparative output
None : NPN output type
P
: PNP output type
Type Appearance Rated pressure range Model No. Pressure port Comparative output
Low pressure
type
*CN-14A-C2
(Connector attached cable
2 m 6.562 ft ) is attached.
−100.0 to +100.0 kPa
DP-001
M5 female thread
NPN open-collector transistor
DP-001-P
PNP open-collector transistor
High pressure
type
0.000 to +1.000 MPa
DP-002
NPN open-collector transistor
DP-002-P
PNP open-collector transistor
Type without connector attached cable Accessory
Type without connector attached cable CN-14A-C2 is available. When ordering
this type, sufx “-J” to the end of Model No.
(e.g.) Type without connector attached cable of DP-001-P is “DP-001-P-J”
• CN-14A-C2 (Connector attached cable 2 m 6.562 ft)
Designation Model No. Description
Connector
attached cable
CN-14A-C1
Length: 1 m 3.281 ft
0.2 mm
2
4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-C2 (Note)
Length: 2 m 6.562 ft
CN-14A-C3
Length: 3 m 9.843 ft
CN-14A-C5
Length: 5 m 16.404 ft
Connector
attached cable
(Flexible cable)
CN-14A-R-C1
Length: 1 m 3.281 ft
0.2 mm
2
4-core exible cabtyre
cable with connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
CN-14A-R-C2
Length: 2 m 6.562 ft
CN-14A-R-C3
Length: 3 m 9.843 ft
CN-14A-R-C5
Length: 5 m 16.404 ft
Connector
CN-14A
Set of 10 housings and 40 contacts
Sensor mounting
bracket
MS-DP1-1
Allows sensors to be installed on the ooring or ceiling.
Multiple sensors can also be mounted closely.
MS-DP1-5
Allows sensors to be installed on the wall. Multiple sensors
can also be mounted closely.
Panel mounting
bracket
MS-DP1-8
Allows installation to panels with thickness of 1 to 3 mm 0.039
to 0.118 in. Multiple sensors can also be mounted closely.
Front protection
cover
MS-DP1-3
Protects the adjustment surfaces of sensors.
(Can be attached when using the panel mounting bracket)
OPTIONS
Note: The connector attached cable CN-14A-C2 is supplied with the DP-0 series.
Recommended connector
Contact: SPHD-001T-P0.5,
Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details
of the recommended products.
Recommended crimping tool
Model No.: YC-610R
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details
of the recommended products.
Bekijk gratis de handleiding van Panasonic DP-001-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | DP-001-P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6757 MB |
