Panamax VT1512-IP handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Afdrukken

Je bekijkt pagina 9 van 48

9

VT1512-IP Instruction Manual - English

www.panamax.com

Action Commands

Switch Outlet Action

The Switch Outlet action is used to turn ON or turn OFF an outlet.

Sample Action–

<outlet id=”2”>0</outlet>

Details–

Element Description

outlet switch outlet: 0 = outlet OFF; 1 = outlet ON. The “id” attribute indicates which outlet, decimal number 1-12.

Switch Outlet Group Action

The Switch Outlet Group action is used to turn ON or turn OFF an outlet group.

Sample Action–

<outlets grp=”c3”>1</outlets>

Details–

Element Description

outlets switch outlet group: 0 = outlets OFF; 1 = outlets ON. The “grp” attribute indicates which outlets participate in the group, using hexadecimal digits. See Common Attributes

section for details.

Cycle Outlet Action

The Cycle Outlet Group action is used to power cycle an outlet group. Each outlet power cycle delay is dened in the device conguration settings. See Common Attributes section for

details.

Sample Action–

<cycleoutlet id=”2”/>

Details–

Element Description

"cycleoutlet" power cycle outlet. The “id” attribute indicates which outlet, decimal number 1-12.

Cycle Outlet Group Action

The Cycle Outlet Group action is used to power cycle an outlet group. Each outlet power cycle delay is dened in the device conguration settings. See Common Attributes section for

details.

Sample Action–

<cycleoutlets grp=”1c3”/>

Details–

Element Description

"cycleoutlets" power cycle a group of outlets. The “grp” attribute indicates which outlets participate in the group, using hexadecimal digits. See Common Attributes section for details.

Cycle Predened Outlet Group Action

The third method for cycling outlets relies on the cycle group already dened by the set cycle group command (see: Set Settings Action). Otherwise, this command behaves identically to

the other two cycle commands. See Common Attributes section for details.

Sample Action–

<cyclegrp/>

Sequence Action

The Sequence action is used to initiate a power sequence of an outlet group. The power sequence outlet group and each outlet sequence on and sequence off delays are dened in the

device conguration settings. See Common Attributes section for details.

Sample Action–

<sequence>0</sequence>

Details–

Element Description

sequence power sequence outlet group: 0 = power OFF sequence; 1 = power ON sequence.

Subscribe Action

The Subscribe action is used to subscribe to device events.

Sample Action–

<eventmgr>

<subscribe uri=”ctrlsys://127.0.0.1:12345”/>

</eventmgr>

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Bekijk gratis de handleiding van Panamax VT1512-IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd