Palmer Monicon M G2 handleiding

50 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 50
5
ATTENTION:
1. Do not operate the device if it has been exposed to large temperature fluctuations (for example, aer
transport). Moisture and condensation can damage the device. Switch on the device only when it has
reached ambient temperature.
2. Make sure that the voltage and frequency of the mains correspond to the values specified on the
device. If the device has a voltage selector switch, do not turn the device on until it has been set
correctly. Use only suitable mains cables.
3. To disconnect the device completely from the power supply, unplug the mains cable or the mains
adapter from the socket. It is not sucient to press the on/o switch on the device.
In addition, a connected amplifier must also be disconnected from the device!
4. Make sure that the fuse used corresponds to the type printed on the device.
5. Ensure that suitable measures have been taken against overvoltage (for example, lightning strikes).
6. Observe the specified maximum output current on devices with a Power Out connection. Ensure that
the total current consumption of all connected devices does not exceed the specified value.
7. Replace plug-in mains cables with original cables only.
DANGER:
1. Danger of suocation/choking! Plastic bags and small parts must be kept out of reach of persons
(including children) with reduced physical, sensory, or mental capabilities.
2 Danger of falling! Make sure that the device is securely installed and cannot fall down. Only use suitable
stands or mounts (particularly for fixed installations). Ensure that accessories are properly installed and
secured. Ensure that all applicable safety regulations are observed.
WARNING:
1. Use the device in the prescribed manner only.
2. Operate the device only with the accessories recommended and intended by the manufacturer.
3 During installation, observe the safety regulations applicable in your country.
4. Aer connecting the device, ensure that all cables are routed so as to avoid damage or accidents,
such as from tripping.
5. Always observe the specified minimum distance to normally flammable materials! If this is not explicitly
stated, the minimum distance is 0.3 metres.
CAUTION:
1. Moving components such as mounting brackets pose a jamming hazard.

Bekijk gratis de handleiding van Palmer Monicon M G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPalmer
ModelMonicon M G2
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4268 MB