Palmer Monicon M G2 handleiding
Handleiding
Je bekijkt pagina 4 van 50
EN
This symbol identifies hazards that can cause electric shock.
This symbol indicates hazardous areas or hazardous situations.
This symbol indicates hazards caused by hot surfaces.
This symbol indicates hazards due to high volume levels.
This symbol indicates a device in which there are no user-serviceable parts.
This symbol indicates additional information on the operation of the product.
This symbol indicates a device that may only be used in dry rooms.
SAFETY INSTRUCTIONS
DANGER:
1. Do not open the device or make any modifications to it.
2. If your device stops working properly, or if liquids or objects get inside it or it is damaged in
any other way, switch it o immediately and disconnect it from the power supply.
This device may be repaired only by authorized repair technicians.
3. For devices of protection class 1, the protective conductor must be connected correctly.
Never disconnect the protective conductor. Devices of protection class 2 do not have a protective
conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device must not be used if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the power cable or power supply unit of the device is damaged, the device must not be
put into operation.
4. Permanently attached mains cables may only be replaced by a qualified person.
Bekijk gratis de handleiding van Palmer Monicon M G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Palmer |
| Model | Monicon M G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4268 MB |
