PAC SRK-RAM13HX handleiding
Handleiding
Je bekijkt pagina 3 van 18
SRK-RAM13HX
Radio Replacement Kit
for 2013-2018 RAM Trucks
and 2019-2024 RAM Classic
Stinger HEIGH10
© 2025 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions.
PAC-Audio.com / StingerSolutions.com
Pacific Accessory Corporation
Page 3
Rev: V1
Date: 020725
®
Section 1: Disassembly
This installation manual will cover the necessary order of procedures to complete the
installationecientlyandtoavoidredoinganystepsalongtheway.Theorderwillbeasfollows:
Disassembly, In-Vehicle Harness Connections and Preparation, Interface and Main Harness
Connections, Display and Radio Unit Mounting Panel Preparation and Radio Unit Installation.
Part One: Dash Disassembly - With Floor Mounted Center Console
Ifequippedwithaoormountedcenterconsole,beginhere.Ifnot,skipaheadtoPartTwoonpage4.
If present, remove the T20 Torx
screw from the back of the small
pocket on the right side of the
dash.
Remove the circled rubber inserts
to gain access to the screws
securing the dash and console in
place.
Remove the two T20 Torx screws
from the top of the dash.
2013-2015 models: Remove the
chrome trim ring around the center
console storage compartment.
2016-2021 models: Remove the
rubber insert in the bottom of the
center console storage compartment.
Remove the 7mm screw from the
bottom of the storage compartment.
Remove the two phillips head screws
in the tray at the bottom of the dash
panel.
Step 2 Step 3
Step 1
Step 4
Step 5
Step 6
Bekijk gratis de handleiding van PAC SRK-RAM13HX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PAC |
| Model | SRK-RAM13HX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18646 MB |
