Ozito PXLEK-1840 handleiding
Handleiding
Je bekijkt pagina 5 van 10
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
Spare Part Part No.
Blade RBLE-190
Spare parts can be ordered from the Special Orders Desk at
your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquiries@ozito.com.au
SPARE PARTS
Note: Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the Lawn Edger by an unauthorised
person or by mishandling of the Lawn Edger. This tool is designed
for DIY use - use in commercial or industrial environments will void
the warranty.
Read instruction manual to reduce the risk of injury
Do not use in the rain or leave the lawn edger outdoors while raining
Wear eye protection
Regulatory compliance mark
(RCM)
Decibel (noise) rating
Wear protective gloves
Wear safety footwear
Thrown objects
Rotating cutting blade
Direction of edger blade
rotation
Keep bystanders at
a safe distance
dB
a.c./~
Wear hearing protection
DESCRIPTION OF SYMBOLS
MAINTENANCE
Power tools that are no longer usable should not be disposed of with household
waste but in an environmentally friendly way. Please recycle where facilities exist.
Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landll and raw materials. Reuse of
recycled material decreases pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council authority for recycling advice.
Changing the Cutting Blade
1. Lay the edger on
its side and place
the blade pin in the
inner flange behind
the blade to hold the
spindle from turning.
Cleaning & Storage
• Keep air intake clean and air vents free of debris to avoid
overheating the motor.
• After each use, blow it with compressed air at low pressure
through the motor housing to ensure it is free from all dust
particles which may build up. Build up of dust particles may cause
the unit to overheat and shorten the life of the machine.
• If the enclosure of the lawn edger requires cleaning do not use
solvents but a moist soft cloth or soft brush only. Never let any
liquid get inside the lawn edger; never immerse any part of the
lawn edger into liquid.
• When not in use remove the battery and the lawn edger should be
stored in a dry, frost free location not within the reach of children.
• Take care that all fastening elements (screws, nuts, etc.) are
firmly tightened, so that you can work safely with the lawn edger.
• Replace worn or damaged blades and bolts in sets to preserve
balance.
2. Place the blade
spanner on the
nut and turn ant-
clockwise to remove
the nut, washer and
blade.
Note: Ensure the nut
and inner flange are
clean of any dirt or
grass prior to fitting.
3. Fit the new blade
over the inner flange,
ensuring it is located
correctly and in the
correct direction.
Note: The blade
rotates in anti-clockwise
direction.
4. Fit the washer and nut,
tighten firmly in a clockwise
direction using the supplied
blade spanner and pin
spanner.
Blade
Direction
Blade
Direction
Blade
Direction
Problem Cause Remedy
Lawn Edger is
not starting.
Possible clogging. Clean the blade and inside the guard of any
grass.
Battery is low in charge. Charge battery.
Battery not inserted
properly.
Insert battery pack correctly.
Lawn Edger is
not operating
at full
capacity.
Possible clogging. Clean the blade and inside the guard of any
grass.
Cutting overgrown grass. Begin with smallest depth setting, then
increase depth as necessary.
Motor
stops while
operating.
Battery has no power. Charge battery.
Blade
Direction
Blade
Direction
Blade
Direction
Blade
Direction
Blade
Direction
Blade
Direction
WARNING! ALWAYS ENSURE THE LAWN EDGER IS
SWITCHED OFF AND THE BATTERY IS REMOVED PRIOR
TO CLEANING OR PERFORMING ANY MAINTENANCE.
Bekijk gratis de handleiding van Ozito PXLEK-1840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ozito |
| Model | PXLEK-1840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2301 MB |
