Owon OWH80Q handleiding
Handleiding
Je bekijkt pagina 24 van 32
4
.
Panel Operation
19
4
Mode Setting
Automatic Mode: Press ON/OFF key for each
channel to enable automatic output.
Manual Mode: Press ON/OFF key first, the channel
will have no output, then press 1~4 keys to execute
the first step, each press will run one step.
Manual Trigger Conditions: Channel 1 corresponds
to 1 key ; Channel 2 corresponds to 2 key;
Channel 3 corresponds to 3 key; Channel 4
corresponds to 4 key.
5
Return
Return to the main interface.
6
Increase/
Decrease
step
Choose to delete or insert, you can delete this line or
insert a new line below.
Data Import and Export
Users can also edit and save curves through import and export methods.
Rotate the knob to select the IMPORT option box, then press to
navigate to the file management page. Use the knob to select the desired
LIST curve, and press again to import the curve. The page will switch
back to the LIST setup main interface, with the total steps, voltage, current,
and time loaded onto the page. Finally, press ON/OFF to power on, and the
panel will send the curve while navigating to the LIST operation main page for
execution.
CSV. File Format Definition
Note
#TotalSteps
2
//Total steps
#Cycles
20
//Cycle steps
#Mode
Auto
//Run mode
（
Auto/Manual
）
STEP
VOLT
CURR
TIME
//The voltage unit is V, the current unit
is A, and the time unit is s.
#1
21
2
1
//Step 1
#2
22
2
2
//Step 2
Note:
1. No Chinese characters/Full-width characters allowed.
2. When saving files and editing in Excel, you need to choose the
CSV UTF-8 format for saving.
Bekijk gratis de handleiding van Owon OWH80Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OWH80Q |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5639 MB |
