Owon OWH80Q handleiding
Handleiding
Je bekijkt pagina 21 van 32
4
.
Panel Operation
16
follows:
(1) According to the 4.5 output mode, set the output mode to LIST mode. The
main interface of LIST mode is shown in the figure below.
(2) Use the knob or direction keys to select SYNC MODE (default is ASYN
MODE). Press to open the drop-down menu, then use the knob or
direction keys to choose the desired operating mode: Asynchronous Mode
or Synchronous Mode. Press to confirm.
①
Channel
Current channel, press CH1, CH2, CH3, CH4 to switch
channel.
②
Current Loop
State
Operating Modes: Automatic Mode, Manual Mode.
Current Step: Current Step Number in Operation and
Total Steps per Cycle.
Current Cycle: Current Cycle Number and Total Cycle
Count.
③
Actual output
Current actual output voltage, output current, output
power.
④
Output mode
CV or CC mode.
⑤
Power On/Off
State
The power on/off status of the current channel.
Bekijk gratis de handleiding van Owon OWH80Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OWH80Q |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5639 MB |
