Handleiding
Je bekijkt pagina 48 van 93
Menu Operations
42
can take this marker as a reference to align the center of the monitor and the
detector center. Make sure the probe has connected with computer and put upon
the monitor screen.
Calibration Steps
First, disable the autonomous calibration method. ensure that the autonomous
calibration method is activated. Select
system
→
Advance Setup
→
FACTORY MANAGE
item in the monitor settings, and set it to the state
ON
.
Now, you can proceed with the professional color management software
Osee
Calibrator
.
Next, launch the
Osee Calibrator
software on your control computer and start
the software to calibrate.
For instructions on using the Osee Calibrator software, please refer to the
software's user guide.
For information on downloading and using the Osee Calibrator calibration software,
you can scan the QR code on the About page of this manual to access technical
support from Osee.
5.3 Menu Settings
When checking or modifying the value of the menu item, cooperating with the Joystick:
.
1.
Operations to the first level menu
◼
Display the monitor settings
Scroll the joystick down to display the menu bar button at the bottom center of
the screen. Scroll right to select the second icon, and press the joystick down
to confirm the selection, it will display the monitor settings panel.
Figure 5.3-1 Menu Bar
Bekijk gratis de handleiding van OSEE Mega 22S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OSEE |
| Model | Mega 22S |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 29289 MB |
