Oromed Oro-Dent Pro handleiding
Handleiding
Je bekijkt pagina 15 van 20
– 13 –
Nduction charger
1. Check the charger plug and cable at regular intervals, wipe the adapter plug
with a cloth.
2. Open the cover of charger base, then clean and dry charger at regular intervals.
Water tank cap
Wipe off any grime and dirt with a cloth.
Nozzle
1. Wash with water and wipe with soft cloth.
2. Replace the nozzle every 6 months.
Water suction tube
1. Wash with water and wipe with soft cloth.
2. Do not bend, pull or twist the water suction tube.
Tank
1. Wash with water and wipe with soft cloth.
2. Dry the tank when not using for a long period.
TROUBLESHOOTING
Problem Possible Cause Solution
It does not work
You’ve just purchased the
product or it has been left
unused for more than
3 months.
Charge the unit for about
24 hours.
It only works for a few mi-
nutes even after charging
The battery has reached
the end of its lift cycle.
Contact service center for
support.
Charging time was insuf-
ficient.
Charge the unit for
about 24 hours.
Water pressure is very low
There is dirt stuck in the
nozzle
Replace the nozzle
The nozzle is deformed
There is dirt stuck in the filter Clean the filter
Water does not come out
The tank is empty Fill up tank
The appliance is tilted too
much while in use
Use with the appliance in
a vertical state
You’ve just purchased the
product or it has been left
unused for a period.
Pull out the nozzle then
flush nozzle hole on the
body.
Bekijk gratis de handleiding van Oromed Oro-Dent Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oromed |
| Model | Oro-Dent Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1756 MB |
