Handleiding
Je bekijkt pagina 9 van 20
9
Smart Sensor Operation
5. Smart Sensor Operation
5.1 Device Power and Charging
1. Connect a DC5V 2A power adaptor (not
supplied) to the USB cable, connect the other
end of the USB cable to the Base Station.
2. Use the On/Off switch on the sensor to turn
On/Off.
3. Charge the device by placing the sensor on
the charging pins of the base station. The base
station must be turned on for the sensor to
charge.
4. Place the sensor on the base station as per the
illustration shown below.
correct position for charging
1mm away from the indication line
CHARGING NOT CHARGING
incorrect position for charging
covering the indication line
NOT CHARGING
incorrect position for charging
approximately 5mm away from
the indication line
1mm
~5mm
5. The charging indicator will illuminate red during charging and change to
blue when the sensor is fully charged.
Tip:
Switch off the sensor to charge when the battery is very low.
Bekijk gratis de handleiding van Oricom OBH36T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oricom |
| Model | OBH36T |
| Categorie | Babyfoon |
| Taal | Nederlands |
| Grootte | 1571 MB |
