Handleiding
Je bekijkt pagina 15 van 39
LI 5080
15
o The safety lock is securely in place.
o The juice jug and waste collector are in position.
2. Cut fruits and vegetables into smaller pieces to fit into the feed funnel on the top lid.
Note:
D. Not recommended for bananas, peaches, apricots, etc., because little juice is obtained.
E. Not recommended for processing coconuts or similar hard foods as this may damage
the motor and sieve.
F. Fruits with thick skin, such as oranges and lemons, should be peeled before juicing. It is
especially important to remove the skin (including the white part), as even small
amounts of skin can give the juice an off-flavor.
3. Turn the speed selector to position 1 or 2. 1 is low speed and 2 is high speed.
4. Place the prepared fruit into the feed funnel on the lid and gently push the fruit into the sieve
using the food pusher.
Caution: Do not put fingers or other foreign objects into the juicer feed funnel while it is in operation.
If food becomes stuck in the feed funnel, use the food pusher or another fruit or vegetable to push it
down. When this method is not possible, turn off the motor and disassemble the blender to remove
the stuck food.
5. When the juice container is full or the food has finished juicing, turn the speed selector to
position 0 and empty the juice container and the waste collector before continuing juicing. Do
not juice continuously for more than 3 minutes. A minimum of 3 minutes of rest must be
allowed between two consecutive cycles. After 3 cycles, the appliance must cool down for the
next 3 cycles.
Note: Do not put in too much food to be extracted at a time. During operation, once the juice
container is full, you must stop the appliance and empty the food residue before the next cycle.
6. Turn the speed selector to position 0 when finished extracting or not in use and disconnect the
plug.
Note: During operation, if the interlock switch between the top cover and the juice collector is
disconnected, the motor will stop to avoid danger.
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait for it to cool completely before cleaning it.
2. Unlock the lock and remove the top cover. To remove the pulp filter, press upwards and the
filter will come out, or pull the liquid outlet tube upwards as well.
3. Empty the juice container and the waste collector, clean the top cover, food pusher,
strainer, juice collector, juice spout and waste collection container under running water. A
small brush can be used for better cleaning of the strainer.
Caution: When cleaning the feeding funnel, there is a blade at the bottom of the feeding funnel,
please wash it carefully to avoid hurting your hands.
4. Clean the outside of the motor unit with a damp cloth. Never immerse the motor unit in
water.
Bekijk gratis de handleiding van Orbegozo LI 5080, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | LI 5080 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3596 MB |