Handleiding
Je bekijkt pagina 14 van 39
LI 5080
14
For initial use
1. Unpack the appliance and place all parts on a horizontal surface.
2. Immerse all removable parts and accessories in warm soapy water, rinse and dry. But never
immerse the motor unit in water to clean it, as there is a risk of electric shock.
Caution: The pulp filter is very sharp, please handle with great care.
3. The correct way of mounting will be described in more detail in the following sections.
Before assembling, make sure the power cord is unplugged from the outlet and the speed selector is
in the 0 position.
ASSEMBLE YOUR CENTRIFUGAL JUICER
1. First assemble the waste collection container onto the base (see figure 1 (a)), then put the
assembled juice collector with the nozzle onto the motor unit, make sure to put it in the correct
position (see figure 1 (b)), in other words, make the nozzle align with the gap of the ring on the
motor unit, and the waste outlet of the juice collector is aligned with the gap of the waste
collection container.
2. Then place the pulp filter in the centre of the juice collector. Make sure the arrow on the sieve is
aligned with the slot on the motor coupler, then press the filter down to lock it into position (see
figure 1 (c)).
Note: When assembling, you need to assemble the juice collector first, then assemble the filter.
When disassembling, please disassemble the sieve first, then remove the juice collector.
1. Place the top cover on the juice collector, make sure that the pressure lever on the top cover is
aligned with the switch pressure lever on the juice collector, and the switch pressure lever on the
juice collector is pressed down completely (see figure 1 (d)), then fasten the cover with the
fastener by moving them in the direction of the arrow.
2. Place your juice cup under the spout and the blender is ready to go.
3. Please note that when the waste collector is full, you must empty it.
USING YOUR JUICER
1. Before connecting the power cord to the power outlet, make sure that:
o The speed selector is in the 0 position, the speed selector has three settings: Ⅰ , 0, Ⅱ .
Bekijk gratis de handleiding van Orbegozo LI 5080, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | LI 5080 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3596 MB |