Handleiding
Je bekijkt pagina 8 van 20
network is at your disposal. You
should read the section “Before
calling in Technical Service” to verify
if you can remedy the anomaly
yourself.
Before calling in Technical
Service
The space heater does not turn on
Check to see if there is gas in the
cylinder and that the regulator is
correctly coupled in the open
position.
Check to see if the flexible tube is
properly connected.
Check that the instructions have
been followed correctly.
If this occurs after changing the gas
cylinder it may be due to:
There is air in the cylinder. Press the
ignition button down for a longer
period of time until the pilot flame
and burner ignite. Then switch to
the MAXIMUM position.
The bottle may have been exposed
to low outside temperatures. Apply
fairly hot wet cloths to the upper
part of the bottle to increase
gasification and the normal output
of gas.
The space heater goes out
If it goes out on completing the
ignition instruction, repeat the
operation, following the
instructions carefully.
If it goes out after 30 minutes, it
means that it is operating in a poorly
ventilated atmosphere. Ventilate
the room and reignite the space
heater.
If it goes out before 30 minutes of
operation, ensure that it is not
exposed to air drafts or that the
cylinder has not run out of gas.
Bekijk gratis de handleiding van Orbegozo HBF 50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Orbegozo |
| Model | HBF 50 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2404 MB |
