Opticis CNDF-200 handleiding
Handleiding
Je bekijkt pagina 4 van 5
Troubleshooting
The display shows black screen.
- Ensure that all plugs and jacks used by external power supplies (both
Opticis and others) are firmly connected. Ensure that the Power and status
LEDs are ON.
- Ensure that the video ports are firmly plugged into the source and display.
- Ensure that the converter and receiver modules are plugged correctly to the
source and display, respectively.
- Check if the source and display are powered on and properly booted.
Screen is distorted or displays noises.
- Check if the graphic resolution is properly set. Go to the display properties of
Windows and tap the settings.
- Ensure that the resolution sets less than 1080p (1920x1080) at 60Hz refresh
ratio.
- Reset the system. Disconnect and reconnect the optical fiber or 5V power
adapters.
Maintenance
No special maintenance is required for the converter and power adapters.
Ensure that the converter and power adapters are stored or used in a benign
environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email info@vigilLink.com or visit its
website at www.vigillink.com
1-5 Troubleshooting, Maintenance, Technical Support
Product Specifications
CNDF-200, Component video to 1-fiber DVI converter
Extension limit: 500 meters (1,640 feet) for 1080p (1920x1080),
60Hz refresh rate.
Graphic transmission bandwidth: Supports up to 1080p
(1920x1080), 60Hz, or 1.485Gbps bandwidth per graphic channel.
Supporting resolution:
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Fiber-optic connection: CNDF-200 has one (1) SC receptacles so
as to be connected with one (1) SC multi-mode fiber, having 62.5
(50) / 125m core.
Dimensions (WDH): 104 x 112 x 28mm
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: - 30°C to 70°C
Humidity: 10% to 85%
AC/DC Power Adapter
Power Input: AC 100-240V, 50/60Hz 0.1A
Power Output: +5 V, 3A SMPS DC-power Adapter
Cord DC Jack: Core is 5 V and outer is GND.
1-6 Product Specifications
Bekijk gratis de handleiding van Opticis CNDF-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Opticis |
| Model | CNDF-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 668 MB |
