Omnitronic VFM-215 AP MK2 handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 32
23
EN
No. Element Function
1 Audio player Allows playback of audio files from USB devices, SD (HC) cards or
mobile devices via Bluetooth.
2 LCD display Indicates audio source, replay mode, elapsed time and information for
the title.
3 Infrared sensor for the
remote control
4 Audio player operating
buttons
[MODE/TWS]: For switching between the data carriers USB and SD and
Bluetooth operation.
[►II]: For switching between play and pause.
[
]: Stops the playback.
[

]: For selecting random play and repeat functions.
[] and []: For title selection (short actuation) and fast forward/reverse
(long actuation).
5 Memory card slot
Allows playback of audio files from an SD (HC) card.
6 USB port
Allows playback of audio files from a USB storage device.
7 Microphone/line inputs XLR and 6.3 mm jacks input for connecting microphones and line-level
devices. Volume control is via the corresponding LEVEL control.
8 Level control To mix the signal of the line input or the audio player to the master
signal.
9 Input selector switch
LINE/PLAYER
Switches between line input and audio player for the master signal.
• Button not pressed: signal of the jacks LINE IN or AUX
• Button pressed: signal of the audio player
10 LINE IN jacks RCA input for connecting audio units with line level output (e.g. mixer,
CD player).
11 MIX OUT jacks RCA output of the master signal of all input sources for connection to a
line input of a mixer, amplifier or a further active speaker.
12 Level control
MAIN LEVEL
Adjusts the volume of the main mix.
13 Tone controls
HI and LOW
Adjust the high and low frequencies of the master signal.
14 POWER indicator Lights up when the device is turned on.
15 CLIP indicator Lights red in case of overload. Reduce the volume with the master
control until the LED does not light anymore, or only at signal peaks.
16 Power switch Turns the device on and off.
17 Power supply Used to plug in the supplied power cord.
18 Fuse Only replace the fuse when the device is disconnected from mains. Only
use fuses of the same rating and power. The correct fuse value is
specified on the rear panel.

Bekijk gratis de handleiding van Omnitronic VFM-215 AP MK2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkOmnitronic
ModelVFM-215 AP MK2
CategorieSpeaker
TaalNederlands
Grootte5298 MB