Omnitronic PAS-215A MK4 handleiding
Handleiding
Je bekijkt pagina 19 van 28
19
•
EN
PAS-181A
MK4
POWERPEAK
LEVEL
No. 11039563 · EAN 4026397739213
POWER
230V 50 Hz 1100W~
IN
RIGHTLEFT
ACTIVE SUBWOOFER
OUT
IN
OUT
DSP
PHASE
0° 180°
HIGH PASS
100Hz
120Hz
OFF
FLAT
KICK
DEEP
Models PAS 151A | 181A
No. Function
1 Overall level control
2
Sta
tus
indicators
PEAK = the signal level is too high; the limiter
will reduce the signal level to protect the
speakers. Reduce the volume with the master
control until the LED does not light anymore,
or only at signal peaks.
POWER = speaker is powered on.
3 DSP switch
To select various equalizer presets:
FLAT = neutral frequency response
KICK = low bass range boost
DEEP = increased low bass range boost
4 HIGH PASS output selector switch
Determines the signal at the outputs.
100HZ = high pass filter active
120HZ = high pass filter active
OFF = full-range operation
5 Phase reversal switch
Allows switching the phase from 0° to 180°
when multiple speakers are operated in
parallel.
6 Input jacks
Balanced XLR inputs for connecting audio
units with line level output (e.g. mixers or
preamplifiers).
7 Output jacks
Balanced XLR jacks to connect another
subwoofer or active speaker system.
8 Fan
Do not cover to avoid overheating.
9 Power switch
Turns power to the speaker system on and off.
10 Power input with fuse holder
Used to plug in the supplied power cord. Only
replace the fuse when the device is
disconnected from mains. Only use fuses of
the same rating and power. The correct fuse
value is specified on the rear panel.
Bekijk gratis de handleiding van Omnitronic PAS-215A MK4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omnitronic |
| Model | PAS-215A MK4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5619 MB |
