Omnitronic MSE-8+ handleiding
Handleiding
Je bekijkt pagina 20 van 24
20
•
EN
6.2 Audio player
The speaker system features an audio player for MP3, WMA and WAV files from USB storage devices and
SD cards as well as wireless music streaming from your Bluetooth devices such as smartphones, tablets and
notebooks. The audio player can either be operated via the buttons on the front panel or via the remote
control.
1) Use the MODE button to select the desired signal source.
2) Use the buttons VOL-/VOL+ on the player (long actuation) or the buttons / on the remote control to
adjust the basic volume level of the audio player. Then mix the player’s signal to the master signal with
the level control in the AUX/PLAYER channel.
3) Insert a USB device into the USB port. Slide memory cards into the card slot with the contacts facing
right. The display indicates the source selected. After loading a data carrier, it is selected as the
playback medium and the playback will start automatically.
4) To select folders on the player, first press the button to activate folder selection mode. Then use the
and
buttons to browse the folders. Press ►
to confirm a selection and start playback.
Note
• Prior to removing a device, always terminate the playback with the buttons ►II. Otherwise damage or loss
of data may occur.
• To save battery power, you can switch off the audio player with the button if the audio player is not used.
6.3 Remote control
When actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor.
Button Function
Player on/off
MODE
Switches between USB/SD/Bluetooth
Mute on/off
STOP
Stop playback
ONE: continuous repeat of the selected title
ALL: continuous repeat of all titles
EQ
Equalizer settings
Pop/Rock/Jazz/Classic/Bass Cut/Normal
/
Short actuation: previous/next title
Long actuation: fast rewind/forward
►
Play/pause
/
Volume down/up
0-9
Direct title selection
Before first operation, pull out the insulating foil on the back. To
change the battery, press the small latch with the notch to the
right and pull out the battery holder. Insert a button cell type
CR2025 into the holder with the positive pole facing upwards.
Remove the battery when not in use for a longer period of time.
Bekijk gratis de handleiding van Omnitronic MSE-8+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omnitronic |
| Model | MSE-8+ |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 4504 MB |
