Handleiding
Je bekijkt pagina 15 van 32
15User ManualDesigned to Enhance Refrigerator
• Securing the Door Fixing Bracket and Refrigerator Door:
Position the tooling plate against the cabinet handle side,
ensuring one side is placed against the upper fixing bracket.
• Insert the door fixing bracket into the corresponding slot in the
tooling plate, then secure it to the cabinet door with flat head
self-tapping screws.
• Insert the corresponding notch of the tooling board into the first
installed door fixing bracket, with the tooling board against the
cabinet door at the handle side.
• Place the second door fixing bracket into the corresponding
notch in the tooling board. Then, secure it to the cabinet door
using flat head self-tapping screws. (Refer to Fig. 8).
• Securing Both Door Fixing Brackets:
Position one end of the tooling plate against the handle side, and
insert the installed door fixing bracket into the corresponding
slots of the tooling plate.
• Insert the other door fixing bracket into the corresponding slots
of the tooling plate.
• Secure both door fixing brackets to the door using flat head
self-tapping screws. (Refer to Fig. 8).
• Hanging the Cabinet Doors onto the Refrigerator Door:
Once the two cabinet doors are mounted, hang them onto the
refrigerator door as shown in the illustration. (Refer to Fig. 9).
• Installing and Securing the Lower Cabinet Doors:
Repeat the above steps for the lower two cabinet doors,
following the same procedure as for the upper doors.
• Suspending the Lower Cabinet Doors onto the Refrigerator:
Install the door fixing brackets to the lower cabinet doors
and hang the two doors onto the refrigerator.
(Refer to Fig. 9).
Adjustment of Cabinet Door
Vertical Adjustment:
Rotate the refrigerator adjustment bolts clockwise or
anticlockwise using an Allen key to move the cabinet door
up or down.
Horizontal Adjustment:
Use an Allen key to rotate the lateral set screws on the
refrigerator door clockwise or anticlockwise, moving the cabinet
door left or right.
Front/Back Adjustment:
• Upper Side: Adjust the front/back clearance by moving the
upper side of the cabinet door in relation to the upper fixing
bracket and refrigerator.
• Middle Side: Move the cabinet door front or back until it's in the
desired position, then tighten the hex socket set screw on the
lateral sides of the refrigerator door.
• Lower Side: Adjust the lower fixing bracket based on the
front/rear clearance between the lower fixing bracket and
screws, making sure it's properly aligned.
NOTE: These adjustments should be calibrated repeatedly until
the cabinet doors are perfectly aligned with the refrigerator.
Figure 9
Door Fixing Bracket
Figure 8
Door Fixing Bracket
Installing Your Refrigerator
Bekijk gratis de handleiding van Omega OIFDF534, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omega |
| Model | OIFDF534 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3644 MB |
